If the display frame is sound and you can identify its graphic attachment, you may be able to order a replacement graphic and keep the hardware. Send the supplier the model, photos of the frame and attachment, and the dimensions they request. A nominal width and height leave too much room for error, particularly when two systems use different fabric edges or the frame has visible areas on both sides.
Check the frame before specifying a new graphic
Set up the frame the way it will be used. Find the model label, original invoice or assembly guide if you still have it. Check that sections connect properly, corners sit as intended and all feet, fixings and joining parts are accounted for. Photograph the full front and rear, then the corners and graphic attachment from close up. Include a scale beside the detail if the supplier asks for it.
Keep a record of bent profiles, missing fasteners and loose joints. For a powered display, note any visible damage and refer electrical faults to a qualified person or the manufacturer. Ask the supplier whether repair parts are available and whether the frame can go back into service. A graphic order makes sense once the hardware that will carry it has been identified and its condition checked.
If you run several similar stands, label the frame or carry case before separating the prints. A frame labelled “Berlin 01” with a corresponding photo and model number is easier to reorder for than one labelled “three metre wall”. Have the person who handles setup verify that the photo matches the hardware actually on hand.
Identify how the old graphic attaches
On a silicone edge graphic, often called SEG, a sewn edge fits into a channel in the frame. On a tube-frame system, a sewn fabric cover goes over the structure and may close with a zip. A poster sits in a different kind of holder again. Compare the examples in SEG displays versus tube tension fabric walls if you cannot identify yours.
The NEO SEG fabric wall, ILUMA SEG fabric wall and SEG lightbox show why the specific system matters. A lightbox graphic needs a fabric and print specification that work with the illumination. With a double-sided frame, confirm the graphic on each side and ask which finish is required for any unprinted rear panel. With a tube cover, photograph the zip position and the outline around the feet or openings.
Keep the old print until the new one has been fitted. Its seams, edging and artwork position can help the supplier identify the format. Ask for the current template. Fabric that has spent several seasons in service may have stretched or changed shape, so measurements from the old print need context.
Send one brief per frame configuration
Include the model and confirmed size, orientation, attachment close-ups, number of faces, artwork version, quantity and delivery date. Where a supplier cannot identify the system, ask which dimensions they need and how to measure them. Do not infer an artwork size from the visible area. Edges, seams and returns can use part of the print that will be hidden after fitting.
For example, suppose you have two wall units of the same advertised width, one illuminated and one unlit. Give them separate line items and attach the photos to the correct line. Identify the artwork on each face by filename or revision. Ask the supplier to confirm compatibility for both lines individually. This small step can prevent a correctly printed graphic from being sent to the wrong frame.
Before approving a proof, check where the logo, main text and any QR code will sit after the graphic is installed. Review the large-format artwork checklist for artwork details and the SEG installation guide for fitting. Leave room in the schedule for a test fit, ideally on the same frame that will travel to the event.
After the test fit, fold or roll the graphic as advised for its material and label the case with the matching frame ID. Keep the template and approved proof with that ID so the next buyer can place a replacement order without identifying the hardware again.
Decide between reprinting, repairing and replacing
Choose the reprint once the frame and graphic format are confirmed and the hardware meets the brief. Ask about repair first when the frame is identifiable and the fault is limited to replaceable hardware. Price a complete display when the hardware cannot be assessed, when the required replacement parts are unavailable or when the new layout needs a different structure. Compare total delivered cost and the time your team will spend preparing each option.
Send Displayproducts your frame details with photos, the intended setup and your deadline. You can also browse the SEG and fabric tension range when you need to price a complete system alongside a reprint.










