ILUMA SEG Fabric Wall Systems

  • Purpose: illuminated branding display for high-visibility messaging
  • Usage: indoor events, retail, and showrooms
  • Setup: standard assembly
  • Portability: easy transport (bag/carton included)
  • Graphics: double-sided
  • Best for: retail and point-of-sale, trade shows and events
  • Size: 100x200cm
  • Description

    ILUMA SEG is a double-sided illuminated fabric wall. LEDs light the graphic evenly from inside the frame, so the print reads across a hall instead of depending on a spot from outside, and both faces carry a graphic — which is what you want on an aisle where people pass on either side.

    Which size

    Sizes run 100×200, 200×200, 200×250, 300×200, 300×250 and 600×250. The 100×200 is a single panel: a totem beside an entrance, or a corner filler. 200×200 and 200×250 are the common stand backwalls, and the taller of the two reads better over the heads of people standing in front of it. The 300 widths cover a full stand side. 600×250 is a hall-scale wall — order it when you have the floor plan and the build crew, not because it is the largest option on the list.

    What the 120 mm profile does

    The frame is a 120 mm wide aluminium profile. That depth sets the distance between the LEDs and the fabric, which is what makes the light even rather than patchy, and it gives the wall the stiffness to stand at full width without twisting under tension. Folding feet keep it upright, assembly needs no tools, and the components pack into the polyester transport bag supplied with the system. For intensive use — a stand that is built and struck several times a season — that combination matters more than any spec on the print.

    Artwork for SEG fabric

    Graphics are silicone edge prints: the fabric is pushed into the groove and tensions itself flat. Supply files at 1:1 scale, minimum 150 dpi, in CMYK, as tiff, jpg or pdf, with fonts converted into curves. Because the graphic is lit from behind, judge the artwork lit rather than on a screen — backlighting changes how dark and light areas balance, and a design approved on a monitor can look thin on the wall. Plan both faces from the start: on a double-sided wall, whatever you skip is still on show.

    Related products

    Other products in SEG and Fabric Tension Displays: Fabric Wall Straight LED, SEG Columns and Cubes and NEO SEG Fabric Wall Systems. Browse the full range: SEG and Fabric Tension Displays. Or the whole Display Systems range.

    Common questions

    Double-sided — does that matter?

    Only if people approach from two directions. In the middle of a hall or an aisle the second face doubles the audience; against a wall it is money nobody will see.

    How rigid is it?

    A 120 mm aluminium profile, which is wide by the standards of this system. That is what keeps a 600x250 cm wall flat and stable under repeated setup.

    How is the graphic changed?

    SEG — the silicone edge of the printed fabric presses into the frame groove, so a new graphic is pushed in by hand with no tools.

    Attributes

    Resolution

    Colors

    Scale

    Fonts

    File formats

    Size

    100×200, 200×200, 200×250, 300×200, 300×250, 600×250

    Submit order request






      Upload logo (max. 20MB):