Roll Up Banner Stands

  • Purpose: portable banner display for promotions
  • Usage: indoor events, retail, and showrooms
  • Setup: standard assembly
  • Portability: portable display format
  • Graphics: single- or double-sided depending on configuration
  • Best for: trade shows and events
  • Size: varies by configuration
  • SKU N/A Categories ,

    Description

    A roll up is the most bought display product in Europe and the one most often bought badly. The graphic is printed once and looks the same on every stand; what you are actually paying for is the frame — the cassette, the base and the mechanism that pulls the print back in. That is where a stand either survives thirty setups or curls at the edges after three.

    Four frames, one price band

    These are our standard-duty stands: aluminium cassette, spring-loaded retractor, telescopic pole, carry bag included. The differences between the four models are real but small, and they come down to base weight and cassette profile.

    • Standard — 80, 85 and 100 cm. The baseline. Rounded cassette, single-piece base, three-section pole.

    • Plus — 85 to 150 cm, and the only model here that goes to 150. Choose it when the graphic has to fill a wide gap or stand behind a table.

    • Mondo — 85 to 120 cm. Slightly heavier base, which matters in a draughty entrance or an exhibition aisle where people brush past.

    • Olmo — 85 cm. Compact, lightest of the four, for a stand that travels by public transport rather than by car.

    Which width

    Width is decided by viewing distance, not by budget. At 2–3 metres — a reception desk, a shop entrance — 85 cm is plenty and a wider stand just blocks a walkway. At 5 metres or more, in a hall or a foyer, 100 to 120 cm is the minimum that reads. 150 cm is for filling a stand backdrop, and at that width the graphic needs to be designed for it rather than scaled up.

    What to check before ordering

    • Height: all of these stand around 200–215 cm. In a room with a 210 cm door frame, measure before you promise.

    • Reprintable: the graphic is replaceable on all four. Keep the frame, order a new print next campaign — roughly a third of the cost of a new stand.

    • Bag: included, and it is the reason the stand survives transport. A stand carried loose in a car boot will be damaged.

    When to spend more

    If the stand lives permanently in a showroom, or if it is set up and packed down every week, go to a premium frame — the mechanism and the base are the parts that fail, and they are what the extra money buys. If it is seen from both sides, you need a double-sided stand. If it will be photographed under lights, fabric removes the glare that PVC film cannot.

    Artwork

    • Scale: 1:1, minimum 150 dpi.

    • Colours: CMYK. Send Pantone references separately if an exact brand colour matters.

    • Fonts: converted to curves.

    • Files: TIFF, JPG or PDF.

    • Bleed: leave 40–60 mm extra at the bottom — that part rolls into the cassette and is never seen.

    Related products

    Other products in Roll Ups: Premium Roll Up Banner Stands, Fabric Roll Up Banner Stands, Budget Roll Up Banner Stands and Double-Sided Roll Up Banner Stands. Browse the full range: Roll Ups. Or the whole Banners range.

    Common questions

    Which width should I choose?

    Viewing distance decides it, not budget. At 2-3 metres — a reception desk or a shop entrance — 85 cm is plenty and anything wider blocks the walkway. At 5 metres or more, in a hall or foyer, 100 to 120 cm is the minimum that reads from across the room. 150 cm is for filling a backdrop, and at that width the graphic has to be designed for it rather than scaled up.

    Can the graphic be replaced later?

    Yes on all four models here. The cassette opens and takes a new print, which costs roughly a third of a new stand. That is the main argument for a standard frame over a budget one: the frame outlives several campaigns.

    How tall is it?

    Around 200 to 215 cm depending on the model. Measure the doorway and the ceiling before promising a client a stand — a 210 cm door frame and a 215 cm stand is a problem discovered at the worst moment.

    What artwork do you need?

    A file at 1:1 scale, minimum 150 dpi, CMYK, fonts converted to curves, as TIFF, JPG or PDF. Leave 40 to 60 mm extra at the bottom: that strip rolls into the cassette and is never seen.

    Attributes

    Model

    Standard, Plus, Mondo, Olmo

    Width

    100cm, 85cm, 80cm, 150cm, 120cm

    Resolution

    min. 150 dpi

    Colors

    CMYK

    Scale

    1:1

    Fonts

    converted into curves

    File formats

    tiff, jpg, pdf

    Submit order request






      Upload logo (max. 20MB):